 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 100322 Low Power 9-Bit Buffer October 1989 Revised August 2000 100322 Low Power 9-Bit Buffer General Description The 100322 is a monolithic 9-bit buffer. The device contains nine non-inverting buffer gates with single input and output. All inputs have 50 k pull-down resistors and all outputs are buffered. Features s 30% power reduction of the 100122 s 2000V ESD protection s Pin/function compatible with 100122 s Voltage compensated operating range = -4.2V to -5.7V s Available to MIL-STD-883 s Available to industrial grade temperature range (PLCC package only) Ordering Code: Order Number 100322PC 100322QC 100322QI Package Number N24E V28A V28A Package Description 24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-010, 0.400 Wide 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square Industrial Temperature Range (-40C to +85C) Devices also available in Tape and Reel. Specify by appending the suffix letter "X" to the ordering code. Logic Symbol Connection Diagrams 24-Pin DIP Pin Descriptions Pin Names D1, D9 O1, O9 Description Data Inputs Data Outputs 28-Pin PLCC Truth Table Inputs D1 - D 9 L H H = HIGH Voltage Level Outputs O1 - O9 L H L = LOW Voltage Level (c) 2000 Fairchild Semiconductor Corporation DS010608 www.fairchildsemi.com 100322 Absolute Maximum Ratings(Note 1) Storage Temperature (TSTG) Maximum Junction Temperature (TJ) VEE Pin Potential to Ground Pin Input Voltage (DC) Output Current (DC Output HIGH) ESD (Note 2) -65C to +150C +150C -7.0V to +0.5V VEE to +0.5V Recommended Operating Conditions Case Temperature (TC) Commercial Industrial Supply Voltage (VEE) 0C to +85C -40C to +85C -5.7V to -4.2V -50 mA 2000V Note 1: The "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum rating. The "Recommended Operating Conditions" table will define the conditions for actual device operation. Note 2: ESD testing conforms to MIL-STD-883, Method 3015. Commercial Version DC Electrical Characteristics (Note 3) VEE = -4.2V to -5.7V, VCC = VCCA = GND, TC = 0C to +85C Symbol VOH VOL VOHC VOLC VIH VIL IIL IIH IEE Parameter Output HIGH Voltage Output LOW Voltage Output HIGH Voltage Output LOW Voltage Input HIGH Voltage Input LOW Voltage Input LOW Current Input HIGH Current Power Supply Current -65 -1165 -1830 0.50 240 -30 Min -1025 -1830 -1035 -1610 -870 -1475 Typ -955 -1705 Max -870 -1620 Units mV mV mV mV A A mA VIN =VIH (Max) or VIL (Min) VIN = VIH(Min) or VIL (Max) Guaranteed HIGH Signal for All Inputs Guaranteed LOW Signal for All Inputs VIN = VIL (Min) VIN = VIH (Max) Inputs Open Conditions Loading with 50 to -2.0V Loading with 50 to -2.0V Note 3: The specified limits represent the "worst case" value for the parameter. Since these values normally occur at the temperature extremes, additional noise immunity and guardbanding can be achieved by decreasing the allowable system operating ranges. Conditions for testing shown in the tables are chosen to guarantee operation under "worst case" conditions. DIP AC Electrical Characteristics VEE = -4.2V to -5.7V, VCC = VCCA = GND Symbol tPLH tPHL tTLH tTHL Parameter Propagation Delay Data to Output Transition Time 20% to 80%, 80% to 20% TC = 0C Min 0.45 0.35 Max 1.45 1.20 TC = +25C Min 0.45 0.35 Max 1.45 1.20 TC = +85C Min 0.45 0.35 Max 1.55 1.20 ns ns Figures 1, 2 (Note 4) Figures 1, 2 Units Conditions Note 4: The propagation delay specified is for single output switching. Delays may vary up to 200 ps with multiple outputs switching. www.fairchildsemi.com 2 100322 Commercial Version (Continued) PLCC AC Electrical Characteristics VEE = -4.2V to -5.7V, VCC = VCCA = GND Symbol tPLH tPHL tTLH tTHL tOSHL Parameter Propagation Delay Data to Output Transition Time 20% to 80%, 80% to 20% Maximum Skew Common Edge Output-to-Output Variation Data to Output Path tOSLH Maximum Skew Common Edge Output-to-Output Variation Data to Output Path tOST Maximum Skew Opposite Edge Output-to-Output Variation Data to Output Path tPS Maximum Skew Pin (Signal) Transition Variation Data to Output Path Note 5: The propagation delay specified is for single output switching. Delays may vary up to 200 ps with multiple outputs switching. Note 6: Output-to-Output Skew is defined as the absolute value of the difference between the actual propagation delay for any outputs within the same packaged device. The specifications apply to any outputs switching in the same direction either HIGH to LOW (tOSHL), or LOW to HIGH (tOSLH), or in opposite directions both HL and LH (tOST ). Parameters tOST and tPS guaranteed by design. TC = 0C Min 0.45 0.35 Max 1.25 1.10 TC = +25C Min 0.45 0.35 Max 1.25 1.10 TC = +85C Min 0.45 0.35 Max 1.35 1.10 Units ns ns Conditions Figures 1, 2 (Note 5) Figures 1, 2 200 200 200 ps (Note 6) 200 200 200 ps (Note 6) 260 260 260 ps (Note 6) 200 200 200 ps (Note 6) Industrial Version PLCC DC Electrical Characteristics (Note 7) VEE = -4.2V to -5.7V, VCC = VCCA = GND, TC = -40C to +85C Symbol VOH VOL VOHC VOLC VIH VIL IIL IIH IEE Parameter Output HIGH Voltage Output LOW Voltage Output HIGH Voltage Output LOW Voltage Input HIGH Voltage Input LOW Voltage Input LOW Current Input HIGH Current Power Supply Current -65 -1170 -1830 0.50 300 -30 -65 TC = -40C Min -1085 -1830 -1095 -1565 -870 -1480 -1165 -1830 0.50 240 -30 Max -870 -1575 TC = 0C to +85C Min -1025 -1830 -1035 -1610 -870 -1475 Max -870 -1620 Units mV mV mV mV A A mA Conditions VIN =VIH (Max) or VIL (Min) VIN = VIH (Min) or VIL (Max) Guaranteed HIGH Signal for All Inputs Guaranteed LOW Signal for All Inputs VIN = VIL (Min) VIN = VIH (Max) Inputs Open Loading with 50 to -2.0V Loading with 50 to -2.0V Note 7: The specified limits represent the "worst case" value for the parameter. Since these values normally occur at the temperature extremes, additional noise immunity and guardbanding can be achieved by decreasing the allowable system operating ranges. Conditions for testing shown in the tables are chosen to guarantee operation under "worst case" conditions. PLCC AC Electrical Characteristics VEE = -4.2V to -5.7V, VCC = VCCA = GND Symbol tPLH tPHL tTLH tTHL Parameter Propagation Delay Data to Output Transition Time 20% to 80%, 80% to 20% TC = -40C Min 0.45 0.30 Max 1.25 1.20 TC = +25C Min 0.45 0.35 Max 1.25 1.10 TC = +85C Min 0.45 0.35 Max 1.35 1.10 Units ns ns Conditions Figures 1, 2 (Note 8) Figures 1, 2 Note 8: The propagation delay specified is for single output switching. Delays may vary up to 200 ps with multiple outputs switching. 3 www.fairchildsemi.com 100322 Test Circuit Notes: VCC, VCCA = +2V, VEE = -2.5V L1 and L2 = equal length 50 impedance lines RT = 50 terminator internal to scope Decoupling 0.1 F from GND to VCC and VEE All unused outputs are loaded with 50 to GND CL = Fixture and stray capacitance 3 pF FIGURE 1. AC Test Circuit Switching Waveforms FIGURE 2. Propagation Delay and Transition Times www.fairchildsemi.com 4 100322 Physical Dimensions inches (millimeters) unless otherwise noted 24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-010, 0.400 Wide Package Number N24E 5 www.fairchildsemi.com 100322 Low Power 9-Bit Buffer Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square Package Number V28A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 6 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com |
Price & Availability of 100322QC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |